For Clone MK3S kit and Clone MK3S bear kit Attention:the package don’t include filament,filament holder,power cable and the printing parts!
The Prusa mini kit does not include printed parts and Filament
Clone Prusa i3 MK3S Full Kit bear kit Clone Prusa mini DIY Full kit Clone Prusa i3 MK2.5S MK3S MMU2S Complete Kit 3D printer
What you will get with this upgrade?
NEW FILAMENT SENSOR
The previous sensor didn’t work well with some specific filaments. The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesn’t care about the optical properties of the filament (it can be completely invisible) and cannot die because of mechanical wear.
EASIER SERVICE
Thanks to completely reworked extruder you don’t have to take apart the whole extruder if you want to change the nozzle or PTFE tube. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. Better Y axis belt tensioning is just the icing on the cake.
BETTER COOLING
Thanks to the better design of the whole extruder, air flow is increased and as a result, cooling capabilities are improved. We have also focused on cooling of the the printed object and MK2.5S/MK3S is better for printing from flexible materials.
For Clone MK3S kit Package listing:
1. 1*aluminum frame + 1*front plate + 1*rear plate + 1*Y carriage+
2. 3* U bolts
3. 10* LM8UU bearings
4. smooth rods kit-2*320mm+2*330mm+2*370mm
5. Aluminum Profiles kit- 2 * 205MM 3030 + 2 x*120MM 3030
6. 4* Antivibration Feet
7. 1* MK52 magnetic heated bed+ 1* steel sheet+2*PEI sheets
8. 1*30cm sleeve cable for heated bed
9. motors kit-Nema 17 stepper motor and z axis 320mm motor
10. Einsy board+1*2004LCD
11. IR filament sensor with cable(Set)
12. power panice with cable and switch
13. P.I.N.D.A V2 sensor
14. power supply
15. 4010 fan
16. 5015 fan
17. heatsink extruder radiator with block nozzle kit
18. 50CM Textile Sleeve Cable Wire*1
19. HT-NTC100K Thermistor Temperature Sensor 1m*1
20. 24V 50W Ceramic Cartridge Heater 1M*1
21. 1 M PTFE Tube Teflonto *1
22. drive gear extruder kit
23. 2m gt2 belt with 2* pulley
24. 2*623h
25. 9* aluminum spacer
26. 1set the whole screw nut kit
27. 1M PTFE Tube
You can print it by the link
//github.com/FYSETC/FYSETC-Prusa-MK3S-clone/tree/master/Prusa%20MK3S%20STL
Buyers are requested to solve the customs clearance problem themselves. If they return due to customs clearance, all the costs incurred will be borne by the buyer. If you need help, please contact customer service before placing an order.







4 GREAT REASONS TO BUY FROM US:
- Over 37,000 happy customers worldwide
- Real people on our support team ready to help
- We proudly offer a full satisfaction guarantee. Our highest priority is to make you happy, so every order comes with a 60-day money back guarantee!
- 100% Safety & Security Guaranteed. At megasellshop.com, we take your security and privacy very seriously. Shop safely using the world’s most popular and trustworthy payment methods!

BUY WITH CONFIDENCE
We truly believe in the best customer support, meaning we will do whatever it takes to make sure you have a positive purchase experience. We respond to emails within 24 hours and always make sure all your concerns are answered ASAP.
- Easy Returns. All our products are backed with 60-day money back guarantee. Just contact us and we will refund the purchase price.
- Risk-Free Purchase: Our Buyer Protection covers your purchase from click to delivery so you can shop with peace of mind.
- 100% Satisfaction Guarantee: All our products are backed with 60-day money back guarantee. If for any reason you’re not completely satisfied with your purchase, contact us for a product refund. We’ll be more than happy to assist you.
worked very well
Good quality components, super clear assembly instructions, it printed right away after assembly! Well done, this is very close to Prusa in terms of overall quality. I printed my parts using default PrusaSlicer Quality 0.2mm settings for Prusament PETG, using 15% gyroid infill and it turned out just fine! Following the instructions and making sure all the distances were within the parameters found in the guide, I was quickly able to get a perferct z-offset of -0.2mm! Highly recommended and wait times are less than those of Prusa :) Spring steel sheet is high quality and looks durable.
perfect item as describe!
all ok
second one,all fine,same as first one.
All perfect.
good quality product, fast shipping. works perfectly
Everything was great. Packaging was torn but fortunately it looks like everything made it fine.
Good store. Fast delivery. Everything OK.
Delivery time and quality is good, the parts must itself be printed what is no problem
Great!, fast delivery.
Quick shipping, everything as described. Use the Prusa assembly guide (for Mk3s, not Mk3s+) and check the Fysetc video if the part you're holding looks a bit different than the one in the guide. I printed the parts myself and in hindsight I'd better have bought them too since my tolerances were a bit crap apparently which made everything a bit harder than it would've been otherwise. My filament sensor (v0.1 included in the kit) isn't currently working, but I'm not sure if it's just down to a broken cable or whatever and I can live without it for now. The bearings seem fine and I don't feel any need to upgrade them right away. Definitely add an all-metal heatbreak if you're intending to print at higher temps than for PETG, the included one has a teflon tube which could release toxic fumes at ~240c. The PSU includes the printed parts from PSU-cover-MK3.stl already so no need to print those.
Great clone! This being my first ever build, it took some effort to find the proper instructions. I assembled this together with the Bear printed parts from TriangleLabs. These parts are a different version than shown in Fsytec's instruction videos though. So I would advice to look at the official assembly guide from Grégoire Saunier if you also bought the bear version. Furthermore, the Bear extruder has slightly different dimesions than the standard one. Which means the z calibration will fail if you don't account for this in the firmware. A custom firmware can be found on the Bear-Lab's github that incorporates this. Once assembled the printer delivers outstanding prints without the need for extensive tuning. I replaced the side hot end fan with the official Noctua fan as this was the loudest part of the printer. The linear bearings aren't the best, so I recommend to replace those as well.
All OK
Thanks a lot! Its rly nice!
Kit had no missing parts and quality on par with the real deal
Well made kit. Fast shipping. Seller recommended.
Amazing printer...it is exactly the same as original prusa mk3s (without PRUSA logo on the frame). All parts are included as stated. I printed Prusa parts from Prusa website and everything fit correctly. Print quality is just same as original Prusa (i use quality nozle) Printer is beautiful and very quiet... Thank you very much.
A manual would be helpful
Profile full anodized best quality. The kit is really good!
Profile Boll anodized even better quality! Best kit what I ever built have!!!
works ok
Hi, more or less good product, I would buy it again I think. The quality is not excellent but good enough for the price. In the end of the day it is a working printer so I'm not complaining here.
fantastic. arrived within 5 days. would recommend this store. outstanding ordering again ASAP.
Now we not required to bought 8mm screw for x and y axis motor .. will bought another unit next month ..Tq very much store